Other Accessories
EARTH BONDING POINT
For providing earthing countinuity and a multiple bonding point, and a re available with one, two and four hole connection.
Material : Gunmetal / Brass
| No. of Holes | Part No. |
|---|---|
| 1 Hole | RKEBP-1 |
| 2 Hole | RKEBP-2 |
| 4 Hole | RKEBP-4 |
BACK PLATE HOLDFAST STEM
Used with an appropriate DC Clip, this gunmetal holdfast is used where the tape is to be secured away from the face wall.
Material : Gunmetal / Brass
| Conductor Material | Part No. |
|---|---|
| Gunmetal | RKBPHF-1 |
BI-METALLIC CONNECTOR – TAPE TO TAPE
These connectors made of stainless steel / copper and aluminium, are meant to be sued where aluminium lightninig protection system and copper earthing network manufactured in Copper and Aluminium..
| Material | Tape size mm | Part No. |
|---|---|---|
| Stainless Steel | 25 x 3 to 25 x 3 | RKTTS-253 |
| Copper + Aluminium | 8 mm Cu to 8 mm | AlRKBCC-8 |
BI-METAL CONNECTOR – CABLE TO CABLE
These connectors made of copper and aluminium, are meant to be used where aluminium lighting protection system and copper earthing network.
| Material | Conductor size mm | Part No. |
|---|---|---|
| Copper + Aluminium | 8 mm Cu to 8 mm Al | RKBCC-8 |
| Stainless Steel | 8 mm to 8 mm | RKBCCS-8 |
GLAZING BAR HOLDFAST
holdfasts can be used for attaching DC clips etc. Onto a projection or extension such as angle iron.
Material : Gunmetal / Brass
Fastner :Brass /Stainless Steel
| Maximum Glazing bar Width | Part No. |
|---|---|
| 12 mm | RKGBHF-126 |
ROD TO TAPE COUPLING
Used in conjunction with the air rod brackets to connect the air rod and tapes. The coupling is screwed onto the air rod and then connects to the tape with the bolts.
Material : Gunmetal / Brass
Fastner :Brass /Stainless Steel
| Tape Size | Thread Dia | Part No. |
|---|---|---|
| 25 | 5/8” or 16 mm | RKRTC-16 |
| 25 | 3/4” or 20 mm | RKRTC-20 |
ROD TO CABLE COUPLINGS
Enables the stranded cable to be connected to the air rod. Used in junction with the side mounting air rod brackets.
Material : Gunmetal / Brass
| Conductor Size mm | Thread Size | Part No. |
|---|---|---|
| 50 | M16 | RKRCC-50 |
| 70 | M16 | RKRCC-70 |
| 95 | M16 | RKRCC-95 |
STRIKE PAD
These clamps are used to connect tape to the earth rod. Available in single plate and double plate.
Material : Gunmetal / Brass
‘U’ Bolt : Copper Fastner : Brass /Stainless Steel
| Application with | Part No. |
|---|---|
| Copper Conductor | RKSP-1 |
FLEXIBLE COPPER BRAID BONDS
Material : Copper
| Size WxH mm | Hole Centres mm | Hole Size mm | Part No. |
|---|---|---|---|
| 25 x 3.5 | 200 | 11 | RKFCBB-2 |
| 25 x 3.5 | 300 | 11 | RKFCBB-3 |
| 25 x 3.5 | 400 | 11 | RKFCBB-4 |
EARTH BOSS
Earth Boss are manufactured from High Tensile Mild Steel, Zinc plated to avoid corrosion. Supplied with Ss / Phosphor bronze studs, nut, spring and plain.
| Length mm | Dia mm | Thread Dia | Part No. |
|---|---|---|---|
| 30 | 38 | 3/8” | RKEB-38 |
| 50 | 50 | 1/2” | RKEB-12 |
ONE HOLE CLIP
These are used for fixing cable conductors and are manufactured from high quality copper.
Material : Copper
| Conductor size mm2 | Part No. |
|---|---|
| 25 | RKOC-25 |
| 35 | RKOC-35 |
| 50 | RKOC-50 |
| 70 | RKOC-70 |
| 95 | RKOC-95 |
| 120 | RKOC-120 |
| 150 | RKOC-150 |
| 185 | RKOC-185 |
| 240 | RKOC-240 |
| 300 | RKOC-300 |
SOLID COPPER LATTICE MATS
HOST earth lattices are usable as an alternative to Earth Plates, which are made copper strips of various sizes.
| Lattice Size mm | Copper Tape Size mm | Part No. |
|---|---|---|
| 500 x 500 | 25 x 3 | RKSCEL-5 |
| 600 x 600 | 25 x 3 | RKSCEL-6 |
| 900 x 900 | 25 x 3 | RKSCEL-9 |
| 1000 x 1000 | 25 x 3 | RKSCEL-10 |
CONCRETE INSPECTION PIT
These are suitable for most types of earthing & lightning protection installations. Not suitable for use in areas where high load, small wheel vehicles are used.
Material : Copper
| Part No. |
|---|
| RKCEIP |
EARTH BARS FOR EARTH PIT
Earth Bars made of hard drawn copper are used for fitting into slots provided in the earth housings where multiple connectors are required into to the earth pit.
| Holes mm | Length mm | Tape Size mm | Hole in | Part No. |
|---|---|---|---|---|
| 5 | 300 | 30 x 6 | 11 | RKEBEH-5 |
| 7 | 300 | 30 x 6 | 11 | RKEBEH-7 |
ROD BRACKETS
These are used for providing projection from the building wall or face.
Material : Gunmetal / Brass
| Rod Length mm | Rod Dia mm | Thread Dia | Part No. |
|---|---|---|---|
| 50 | 15 | 5/8" or 16 mm | RKFSA-50 |
| 70 | 15 | 5/8" or 16 mm | RKFSA-70 |
| 95 | 15 | 5/8" or 16 mm | RKFSA-95 |
C CRIMP CONNECTORS
C Crimp Connectors are made of copper with thick walls, used for parallel or tap connection of copper cables. Appropriate tools may be used for installation of C Crimp Connectors.
Material : Copper
| Conductor Min. to max. | Part No. |
|---|---|
| 16-35 | RKCC-1 |
| 25-35 | RKCC-2 |
| 50-70 | RKCC-3 |
| 70-70 | RKCC-4 |
| 95-120 | RKCC-5 |
| 120-120 | RKCC-6 |
| 120-240 | RKCC-7 |
| 150-240 | RKCC-8 |
EARTH PLATE
Earth Plates are manufactured from electrolytic grade solid copper sheet. Earth Plates made of Steel, bonded with electrolytic copper, are also available.
Material : Copper
| Plate Size mm | Part No. |
|---|---|
| 500x500x3 | RKSC-1 |
| 500x500x5 | RKSC-2 |
| 600x600x3 | RKSC-3 |
| 600x600x3 | RKSC-4 |
| 900x900x3 | RKSC-5 |
| 900x900x3 | RKSC-6 |
| 1000x1000x3 | RKSC-7 |
| 1000x1000x5 | RKSC-8 |
WIPING GLANDS
Material : Brass
Finish : Natural
| Gland Size | Dial Over Metal Sheath of Cable (mm) | A mm | B mm | C mm | D mm | E mm | F mm | G mm | H mm | J mm | R mm | Part No. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| X | 12 to 51 | 137 | 90 | 60 | 19 | 90 | 90 | 66 | 66 | 12 | 12 | RKWXG-1 |
| Y | 25 to 78 | 155 | 95 | 89 | 32 | 114 | 123 | 95 | 86 | 14 | 14 | RKWXG-2 |
| Z | 25 to 94 | 195 | 140 | 108 | 32 | 190 | 100 | - | - | 14 | - | RKWXG-3 |
