AIR TERMINAL BASE
AIR TERMINAL BASE – TAPE
These are used for fixing air rods.
Material : Gunmetal / Brass / Aluminium
| Thread Dia mm | Max. Tape size | Material | Part No. |
|---|---|---|---|
| 1/2" or 10 mm | 25 x 6 mm | Gunmetal | RKATBC1 |
| 5/8" or 16 mm | 25 x 6 mm | Gunmetal | RKATBC-2 |
| 3/4" or 20 mm | 25 x 6 mm | Gunmetal | RKATBC3 |
FLAT SADDLE
These Flat Saddles are used for supporting taper pointed or blunt air rods with copper tapes on flat surfaces.
Material : Gunmetal Brass
| Thread Dia | Maximum Tape Size | Part No. |
|---|---|---|
| 5/8" | 25 x 6 | RKFS-58 |
| M 16 | 25 x 6 | RKFS-16 |
| 3/4" | 25 x 6 | RKFS-34 |
| 20 mm | 25 X 6 | RKFS-20 |
RIDGE SADDLE
Ridge Saddles are used for supporting air terminals on the roof Ridges.
Material : Gunmetal Brass
| Thread Dia | Maximum Tape Size | Part No. |
|---|---|---|
| 5/8" | 25 x 6 | RKRS-58 |
| M 16 | 25 x 6 | RKRS-16 |
| 3/4" | 25 x 6 | RKRS-34 |
| 20 mm | 25 X 6 | RKRS-20 |
FLAT SADDLE – TYPE ‘A’
Flat Saddles are used for supporting taper pointed or blunt air rods with circular conductors on flat surfaces.
Material : Gunmetal / Brass Fastner : Brass /Stainless Steel
| Rod Length mm | Rod Dia mm | Thread Dia | Part No. |
|---|---|---|---|
| 50 | 15 | 5/8" or 16 mm | RKFSA-50 |
| 70 | 15 | 5/8" or 16 mm | RKFSA-70 |
| 95 | 15 | 5/8" or 16 mm | RKFSA-95 |
TERMINAL BASE LIGHT DUTY
Rod to Conductor. four fixing holes are provided on it.
Material : Brass
| Thread Dia. | Part No. |
|---|---|
| M 16 or 5/8” | RKTBLD-1 |
AIR TERMINAL BASE – CABLE
These air terminal bases are used for mounting of air rods either horizontally or vertically.
Material : Gunmetal / Brass
| Position | Conductor Dia | Thread Dia | Part No. |
|---|---|---|---|
| Vertical | 8 mm | 10 mm | RKAT-1 |
| Horizontal | 8 mm | 10 mm | RKAT-2 |
